Kürzlich haben wir festgestellt, dass Kriminelle vorgaben, AiPCBA zu sein, um zu betrügen oder zu versuchen, Fälschungen zu verkaufen
ausgefallene Komponenten zu günstigen Preisen.
AiPCBA hat ein
Komponentenprüflabor
im Jahr 2021 mit dem Ziel, qualitätsgesicherte Komponenten bereitzustellen.
Wir empfehlen unseren Kunden dringend, sich für zuverlässige Komponentenlieferanten zu entscheiden.
Bitte beachten Sie, dass die einzigen offiziellen Website- und E-Mail-Suffixe sind
aipcba.com
The ADAU1463/ADAU1467 are automotive qualified audio processors that far exceed the digital signal processing capabilities of earlier SigmaDSP® devices. They are codecompatible with each other, as well as the ADAU1450/ADAU1451/ADAU1452 SigmaDSP® processors. The restructured hardware architecture is optimized for efficient audio processing. The audio processing algorithms support a seamless combination of stream processing (sample-by-sample), multi-rate processing, and block processing paradigms. The graphical programming tool, SigmaStudio™ enables the creation of signal processing flows that are interactive, intuitive and powerful. The enhanced digital signal processor (DSP) core architecture enables some types of audio processing algorithms to be executed using significantly fewer instructions than were required on previous SigmaDSP generations, leading to vastly improved code efficiency
The 1.2 V, 32-bit DSP core can run at frequencies of up to 294.912 MHz and execute up to 6144 instructions per sample at the standard sample rate of 48 kHz. Powerful clock generator hardware, including a flexible PLL with multiple fractional integer outputs supports all industry standard audio sample rates, non-standard rates over a wide range can generate up to 15 sample rates simultaneously. These clock generators, along with the on board asynchronous sample rate converters (ASRCs) and a flexible hardware audio routing matrix, make the ADAU1463/ADAU1467 ideal audio hubs that greatly simplify the design of complex multirate audio systems.
The ADAU1463/ADAU1467 have four input serial ports and four output serial ports. Each has a fully asynchronous clock domain capable of operating as either clock master or slave. In addition, each serial port supports multiple data lines. Each of the eight pins SDATAIO pin may be associated with any of the four input or four output serial ports. Serial ports with multiple data pins use a single bit clock and frame clock to transmit or receive additional channels of audio data. This allows more channels of audio I/O without the need to run serial ports at high speeds. It also enables serial audio communication with multiple synchronous peripherals. The additional data pins can carry from two to eight channels. These expanded serial audio ports, along with the clock generators, the on board asynchronous sample rate converters (ASRCs) and a flexible hardware audio routing matrix, make the ADAU1463/ADAU1467 ideal audio hubs that greatly simplify the design of complex multirate audio systems.
The ADAU1463/ADAU1467 interface with a wide range of ADCs, DACs, digital audio devices, amplifiers, and control circuitry with highly configurable serial ports, I2C, SPI, S/PDIF interfaces, and multipurpose input/output pins. Dedicated decimation filters can decode the PDM output of up to four MEMS microphones.
The ADAU1463/ADAU1467 have independent I2C/SPI slave and master control ports. This allows them both to be programmed and controlled by an external master device such as a microcontroller, and program and control slave peripherals directly. Self-boot functionality and the master control port enable complex standalone systems.
Applications
Automotive audio processing
Head units
Navigation systems
Rear seat entertainment systems
DSP amplifiers (sound system amplifiers)
Commercial and professional audio processing
### Features and Benefits
Qualified for automotive applications
High performance SigmaDSP core enables low latency and audio applications
Active Noise Cancellation (ANC)
Echo-Canceller and Noise Reduction (ECNR)
Surround sound algorithms
Increased I/O and/or larger internal memory compared to ADAU1462/ADAU1463/ADAU1466 models
Features SigmaStudio, a proprietary graphical Integrated Development Environment (IDE), for the development of custom signal flows
Comprehensive Toolbox of pre-defined building blocks
Faster design time with proven solutions
Intuitive system design
294.912 MHz, 32-bit SigmaDSP core at 1.2 V
24 kWords of program memory
80 kWords of parameter/data RAM
6144 SIMD instructions per sample at 48 kHz
1600 ms digital audio delay pool at 48 kHz
Audio I/O and routing
4 serial input ports, 4 serial output ports with assignable parallel data pins (up to 32 serial data pins total)
48-channel, 32-bit digital I/O up to a sample rate of 192 kHz
Flexible configuration of I2S, left and right justified, and up to 16-channel TDM formats on serial data pins
8 stereo ASRCs from 1:8 up to 7.75:1 ratio and 139 dB dynamic range
Stereo S/PDIF input and output at 192 kHz
Four PDM microphone input channels
Multichannel, byte addressable TDM serial ports
Clock oscillator for generating master clock from crystal
Integer PLL and flexible clock generators
Integrated die temperature sensor
I2C and SPI control interfaces (both slave and master)
Standalone operation
Self-boot from serial EEPROM
8-channel, 10-bit SAR auxiliary control ADC
26 multipurpose pins for digital controls and outputs
On-chip regulator for generating 1.2 V from 1.8 V to 3.3 V supply
88-lead, 12 mm × 12 mm LFCSP package with 6 mm exposed pad
 Die hier aufgeführten Geschäftsbedingungen dienen nur als Referenz, die tatsächlichen AGB unterliegen dem Angebot des Verkäufers. - Bitte bestätigen Sie die Spezifikationen der Produkte bei der Bestellung. - MOQ bedeutet die Mindestbestellmenge, die erforderlich ist, um jedes Teil zu kaufen. - Wenn Sie spezielle Bestellanweisungen haben, vermerken Sie diese bitte auf der Bestellseite. - Die Pre-Shipment Inspection (PSI) wird angewendet. - Sie können uns jederzeit eine E-Mail senden, um den Bestellstatus zu überprüfen. - Bestellungen können nach Versand der Pakete nicht mehr storniert werden.
- TT im Voraus (Banküberweisung), PayPal kann ausgewählt werden. - Nur Barüberweisung. (Überweisungen mit Schecks und Wechseln werden nicht akzeptiert.) - Der Kunde ist für die Zahlung aller möglichen Gebühren verantwortlich, einschließlich Umsatzsteuer, Mehrwertsteuer und Zollgebühren usw. - Wenn Sie die detaillierte Rechnung oder Steuernummer benötigen, senden Sie uns bitte eine E-Mail.
- FedEx, DHL und UPS können ausgewählt werden. - Sie können auswählen, ob die Versandkosten von Ihrem Versandkonto oder von unserer Seite berechnet werden sollen. - Bitte bestätigen Sie dies im Voraus mit dem Logistikunternehmen, wenn Sie sich in einem abgelegenen Gebiet befinden.
(Es können zusätzliche Gebühren (35-50 USD) für die Lieferung in diese Gebiete anfallen.) - Lieferdatum: normalerweise 2 bis 7 Werktage. - Tracking-Nummer wird gesendet, sobald Ihre Bestellung versandt wurde.
- Sorgfältig geprüft und verpackt von AiPCBA - Vakuumverpackung - Antistatische Verpackung - Antivibrationsschaum
- Einkommensqualitätskontrolle (IQC), über 800 qualifizierte Vertriebspartner. - 500 m² Labor für fortschrittliche Komponententests, Fälschungserkennung, RoHS-konform usw. - 2000 m² digitales Komponentenlager, konstante Temperatur und Luftfeuchtigkeit - Entkapselungsinspektion - Röntgeninspektion - XRF-Inspektion - Elektrische Prüfung - Oberflächenprüfung
- Substandard- und Fälschungserkennung - Fehleranalyse - Elektrische Prüfung - Lebenszyklus- und Zuverlässigkeitstests - AiPCBA hat 2021 ein Komponententestlabor eingerichtet
Mehr erfahren >
AiPCBA verwendet Cookies, um Ihnen ein besseres Erlebnis zu bieten. Detaillierte Informationen zur Verwendung von Cookies auf dieser Website finden Sie in unserer Datenschutzerklärung. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu.