herunterladen
TVP5150AM1
www.ti.com
SLES209E–NOVEMBER 2007– REVISED OCTOBER 2011
Ultralow-Power NTSC/PAL/SECAM Video Decoder
Check for Samples: TVP5150AM1
1 Introduction
1.1 Features
1
• Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I, • Standard Programmable Video Output Formats
M, N, Nc), and SECAM (B, D, G, K, K1, L) Video
– ITU-R BT.656, 8-Bit 4:2:2 With Embedded
• Supports ITU-R BT.601 Standard Sampling Syncs
• High-Speed 9-Bit Analog-to-Digital Converter – 8-Bit 4:2:2 With Discrete Syncs
(ADC)
• Macrovision™ Copy Protection Detection
• Two Composite Inputs or One S-Video Input
• Advanced Programmable Video Output
• Fully Differential CMOS Analog Preprocessing Formats
Channels With Clamping and Automatic Gain
– 2× Oversampled Raw Vertical Blanking
Control (AGC) for Best Signal-to-Noise (S/N)
Interval (VBI) Data During Active Video
Performance
– Sliced VBI Data During Horizontal Blanking
• Ultralow Power Consumption
or Active Video
• 48-Terminal PBGA Package (ZQC) or
• VBI Modes Supported
32-Terminal TQFP Package (PBS)
– Teletext (NABTS, WST)
• Power-Down Mode: <1 mW
– Closed-Caption Decode With FIFO and
• Brightness, Contrast, Saturation, Hue, and
Extended Data Services (XDS)
Sharpness Control Through I
2
C
– Wide Screen Signaling, Video Program
• Complementary 4-Line (3-H Delay) Adaptive
System, CGMS-A, Vertical Interval Time
Comb Filters for Both Cross-Luminance and
Code
Cross-Chrominance Noise Reduction
– Gemstar 1x/2x Electronic Program Guide
• Patented Architecture for Locking to Weak,
Compatible Mode
Noisy, or Unstable Signals
– Custom Configuration Mode That Allows
• Single 14.31818-MHz Crystal for All Standards
User to Program Slice Engine for Unique VBI
• Internal Phase-Locked Loop (PLL) for Data Signals
Line-Locked Clock and Sampling
• Power-On Reset
• Subcarrier Genlock Output for Synchronizing
• Industrial Temperature Range
Color Subcarrier of External Encoder
(TVP5150AM1I): –40°C to 85°C
• 3.3-V Digital I/O Supply Voltage Range
• Qualified for Automotive Applications
(AEC-Q100 Rev G – TVP5150AM1IPBSQ1,
TVP5150AM1IPBSRQ)
1.2 Description
The TVP5150AM1 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a
space-saving 48-terminal PBGA package or a 32-terminal TQFP package, the TVP5150AM1 decoder
converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also
available. The optimized architecture of the TVP5150AM1 decoder allows for ultralow power consumption.
The decoder consumes 115-mW power under typical operating conditions and consumes less than 1 mW
in power-down mode, considerably increasing battery life in portable applications. The decoder uses just
one crystal for all supported standards. The TVP5150AM1 decoder can be programmed using an I
2
C
serial interface.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2007–2011, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Verzeichnis
- ・ Konfiguration des Pinbelegungsdiagramms on Seite 26
- ・ Abmessungen des Paketumrisses on Seite 4 Seite 82 Seite 84 Seite 85
- ・ Teilenummerierungssystem on Seite 4
- ・ Markierungsinformationen on Seite 82 Seite 83
- ・ Blockdiagramm on Seite 6 Seite 10 Seite 11
- ・ Beschreibung der Funktionen on Seite 10 Seite 11 Seite 12 Seite 13 Seite 14
- ・ Technische Daten on Seite 74 Seite 75 Seite 76 Seite 77
- ・ Anwendungsbereich on Seite 1 Seite 3 Seite 83 Seite 88
- ・ Elektrische Spezifikation on Seite 74 Seite 75 Seite 76 Seite 77
