herunterladen
Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
Reference
Design
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
MSP430FR5869
,
MSP430FR5868
,
MSP430FR5867
,
MSP430FR58671
MSP430FR5859
,
MSP430FR5858
,
MSP430FR5857
MSP430FR5849, MSP430FR5848, MSP430FR5847, MSP430FR58471
SLASE34D –MAY 2014–REVISED MARCH 2017
MSP430FR58xx Mixed-Signal Microcontrollers
1 Device Overview
1
1.1 Features
1
(1) Minimum supply voltage is restricted by SVS levels.
(2) RTC is clocked by a 3.7-pF crystal.
• Embedded Microcontroller
– 16-Bit RISC Architecture up to 16‑MHz Clock
– Wide Supply Voltage Range
(1.8 V to 3.6 V)
(1)
• Optimized Ultra-Low-Power Modes
– Active Mode: Approximately 100 µA/MHz
– Standby (LPM3 With VLO): 0.4 µA (Typical)
– Real-Time Clock (LPM3.5): 0.25 µA (Typical)
(2)
– Shutdown (LPM4.5): 0.02 µA (Typical)
• Ultra-Low-Power Ferroelectric RAM (FRAM)
– Up to 64KB of Nonvolatile Memory
– Ultra-Low-Power Writes
– Fast Write at 125 ns Per Word (64KB in 4 ms)
– Unified Memory = Program + Data + Storage in
One Single Space
– 10
15
Write Cycle Endurance
– Radiation Resistant and Nonmagnetic
• Intelligent Digital Peripherals
– 32-Bit Hardware Multiplier (MPY)
– 3-Channel Internal DMA
– Real-Time Clock (RTC) With Calendar and
Alarm Functions
– Five 16-Bit Timers With up to Seven
Capture/Compare Registers Each
– 16-Bit Cyclic Redundancy Checker (CRC)
• High-Performance Analog
– 16-Channel Analog Comparator
– 12-Bit Analog-to-Digital Converter (ADC)
With Internal Reference and Sample-and-Hold
and up to 16 External Input Channels
• Multifunction Input/Output Ports
– All Pins Support Capacitive Touch Capability
With No Need for External Components
– Accessible Bit-, Byte-, and Word-Wise (in Pairs)
– Edge-Selectable Wake From LPM on All Ports
– Programmable Pullup and Pulldown on All Ports
• Code Security and Encryption
– Random Number Seed for Random Number
Generation Algorithms
• Enhanced Serial Communication
– eUSCI_A0 and eUSCI_A1 Support
– UART With Automatic Baud-Rate Detection
– IrDA Encode and Decode
– SPI
– eUSCI_B0 Supports
– I
2
C With Multiple Slave Addressing
– SPI
– Hardware UART and I
2
C Bootloader (BSL)
• Flexible Clock System
– Fixed-Frequency DCO With 10 Selectable
Factory-Trimmed Frequencies
– Low-Power Low-Frequency Internal Clock
Source (VLO)
– 32-kHz Crystals (LFXT)
– High-Frequency Crystals (HFXT)
• Development Tools and Software
– Free Professional Development Environments
With EnergyTrace++™ Technology
– Development Kit (MSP-TS430RGZ48C)
• Family Members
– Device Comparison Summarizes the Available
Device Variants and Package Types
• For Complete Module Descriptions, See the
MSP430FR58xx, MSP430FR59xx,
MSP430FR68xx, and MSP430FR69xx Family
User's Guide
1.2 Applications
• Metering
• Energy Harvested Sensor Nodes
• Wearable Electronics
• Sensor Management
• Data Logging
1.3 Description
The MSP430™ ultra-low-power (ULP) FRAM platform combines uniquely embedded FRAM and a holistic
ultra-low-power system architecture, allowing innovators to increase performance at lowered energy
budgets. FRAM technology combines the speed, flexibility, and endurance of SRAM with the stability and
reliability of flash at much lower power.
Verzeichnis
- ・ Konfiguration des Pinbelegungsdiagramms on Seite 7 Seite 86 Seite 88 Seite 89 Seite 90
- ・ Abmessungen des Paketumrisses on Seite 5 Seite 130 Seite 131 Seite 133 Seite 134
- ・ Paket-Footprint-Pad-Layout on Seite 120
- ・ Markierungsinformationen on Seite 123 Seite 130 Seite 131 Seite 132
- ・ Blockdiagramm on Seite 2 Seite 120
- ・ Technische Daten on Seite 17 Seite 18 Seite 19 Seite 20 Seite 21
- ・ Anwendungsbereich on Seite 1 Seite 116 Seite 117 Seite 118 Seite 119
