herunterladen
19-2647; Rev 6; 8/12
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
MAX6126
Ultra-High-Precision, Ultra-Low-Noise,
Series Voltage Reference
General Description
The MAX6126 is an ultra-low-noise, high-precision, low-
dropout voltage reference. This family of voltage refer-
ences feature curvature-correction circuitry and
high-stability, laser-trimmed, thin-film resistors that
result in 3ppm/°C (max) temperature coefficients and
an excellent ±0.02% (max) initial accuracy. The propri-
etary low-noise reference architecture produces a low
flicker noise of 1.3µV
P-P
and wideband noise as low as
60nV/√Hz (2.048V output) without the increased supply
current usually found in low-noise references. Improve
wideband noise to 35nV/√Hz and AC power-supply
rejection by adding a 0.1µF capacitor at the noise
reduction pin. The MAX6126 series mode reference
operates from a wide 2.7V to 12.6V supply voltage
range and load-regulation specifications are guaran-
teed to be less than 0.025Ω for sink and source cur-
rents up to 10mA. These devices are available over the
automotive temperature range of -40°C to +125°C.
The MAX6126 typically draws 380µA of supply current
and is available in 2.048V, 2.500V, 2.800V, 3.000V,
4.096V, and 5.000V output voltages. These devices
also feature dropout voltages as low as 200mV. Unlike
conventional shunt-mode (two-terminal) references that
waste supply current and require an external resistor,
the MAX6126 offers supply current that is virtually inde-
pendent of supply voltage and does not require an
external resistor. The MAX6126 is stable with 0.1µF to
10µF of load capacitance.
The MAX6126 is available in the tiny 8-pin µMAX
®
, as
well as 8-pin SO packages.
Applications
High-Resolution A/D and D/A Converters
ATE Equipment
High-Accuracy Reference Standard
Precision Current Sources
Digital Voltmeters
High-Accuracy Industrial and Process Control
Features
o Ultra-Low 1.3µV
P-P
Noise (0.1Hz to 10Hz, 2.048V
Output)
o Ultra-Low 3ppm/°C (max) Temperature Coefficient
o ±0.02% (max) Initial Accuracy
o Wide (V
OUT
+ 200mV) to 12.6V Supply Voltage
Range
o Low 200mV (max) Dropout Voltage
o 380µA Quiescent Supply Current
o 10mA Sink/Source-Current Capability
o Stable with C
LOAD
= 0.1µF to 10µF
o Low 20ppm/1000hr Long-Term Stability
o 0.025Ω (max) Load Regulation
o 20µV/V (max) Line Regulation
o Force and Sense Outputs for Remote Sensing
OUTS
I.C.*GNDS
1
2
8
+
7
I.C.*
OUTFIN
GND
NR
SO/µMAX
TOP VIEW
3
4
6
5
MAX6126
*I.C. = INTERNALLY CONNECTED. DO NOT USE.
Pin Configuration
Ordering Information
PART TEMP RANGE
PIN-
PACKAGE
OUTPUT
VOLTAGE
(V)
MAXIMUM INITIAL
ACCURACY (%)
MAXIMUM TEMPCO
(-40°C to +85°C)
(ppm/°C)
MAX6126AASA21+ -40°C to +125°C 8 SO 2.048 0.02 3
MAX6126BASA21+ -40°C to +125°C 8 SO 2.048 0.06 5
MAX6126A21+ -40°C to +125°C 8 µMAX 2.048 0.06 3
Ordering Information continued at end of data sheet.
µMAX is a registered trademark of Maxim Integrated Products, Inc.
+
Denotes a lead(Pb)-free/RoHS-compliant package.
Verzeichnis
- ・ Konfiguration des Pinbelegungsdiagramms on Seite 1 Seite 14
- ・ Abmessungen des Paketumrisses on Seite 17
- ・ Teilenummerierungssystem on Seite 1 Seite 17
- ・ Beschreibung der Funktionen on Seite 1
- ・ Anwendungsbereich on Seite 1 Seite 15
- ・ Elektrische Spezifikation on Seite 3 Seite 4 Seite 5 Seite 6 Seite 7
