herunterladen
EVAL-ADuM5411EBZ User Guide
UG-1007
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Using the EVAL-ADuM5411EBZ Evaluation Board with iCoupler Quad-Channel
Isolators and Integrated DC-to-DC Converters
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 12
FEATURES
Access to 4 data channels and data output enable control pins
Easily configurable isoPower dc-to-dc converter controls
Split primary and secondary power planes for independent
operation of data channels and isoPower integrated dc-to-
dc converters
Multiple connection options for data and power
Support for printed circuit board (PCB) edge mounted
coaxial connectors
Support for active probes
Layout for electromagnetic interference (EMI) evaluation
DOCUMENTS NEEDED
ADuM5410/ADuM5411/ADuM5412 data sheet
ADuM6410/ADuM6411/ADuM6412 data sheet
AN-1349 Application Note
AN-1109 Application Note
AN-0971 Application Note
EVALUATION KIT CONTENTS
EVAL-ADuM5411EBZ, populated with the ADuM5411
EVAL-ADuM5411UEBZ, DUT unpopulated (must be ordered
separately)
ADDITIONAL EQUIPMENT NEEDED
One to three 3.3 V to 5.0 V power supplies
Edge mounted SMA
GENERAL DESCRIPTION
The EVA L -ADuM5411EBZ supports quad-channel iCoupler® data
isolators, including the ADuM5410/ADuM5411/ADuM5412 and
ADuM6410/ADuM6411/ADuM6412, with an isoPower integrated
dc-to-dc converter in 24-lead SSOP packages. The E VA L -
ADuM5411EBZ supports signal distribution, loopback, and loads
referenced to the power and ground planes. The evaluation board
also has EMI evaluation and bypass and bulk capacitors. Signal
sources can be conducted to the board through header pins or
through edge mounted SMA connectors (SMA connectors must
be ordered separately). Screw terminal blocks on the evaluation
board provide power connections. The board includes 0.2 inch
header positions for compatibility with active probes (probe header
pins must be ordered separately).
The evaluation board follows best PCB design practices for 4-layer
boards, including a full power plane and ground plane on each
side of the isolation barrier. No other EMI or noise mitigation
design features are included on the evaluation board. In cases of
high speed operation, or when ultralow emissions are required,
refer to the AN-1349 Application Note, AN-1109 Application
Note, and AN-0971 Application Note for additional evaluation
board layout techniques.
The E VA L -ADuM5411EBZ is supplied with the ADuM5411
installed. Other supported iCoupler digital isolators with an
integrated dc-to-dc converters must be ordered separately to use
with the EVA L -ADuM5411UEBZ, including the ADuM5410,
ADuM5412, ADuM6410, ADuM6411, and ADuM6412
Complete specifications for the ADuM5410/ADuM5411/
ADuM5412 and the ADuM6410/ADuM6411/ADuM6412 are
available in the ADuM5410/ADuM5411/ADuM5412 data sheet
and ADuM6410/ADuM6411/ADuM6412 data sheet,
respectively, available from Analog Devices, Inc., and should be
consulted in conjunction with this data sheet when using the
evaluation board.
Verzeichnis
- ・ Teilenummerierungssystem on Seite 12
- ・ Blockdiagramm on Seite 7
