herunterladen
EVAL-10MSOPEBZ User Guide
UG-1037
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Te l: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluation Board for 10-Lead MSOP Devices in the Switches and Multiplexers Portfolio
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 6
FEATURES
10-lead MSOP evaluation board
Clamp allows the main device to be easily changed
Gold pin connectors allow the addition of passive
components
SMB connectors for the input/output of signals
Additional space on-board to allow for prototyping
EVALUATION KIT CONTENTS
EVAL-10MSOPEBZ evaluation board
ONLINE RESOURCES
Documents Needed
Data sheet of the device being evaluated
EVAL-10MSOPEBZ user guide
EQUIPMENT NEEDED
Device being evaluated
DC voltage source
Analog signal source
Method to measure voltage, such as a digital multimeter (DMM)
GENERAL DESCRIPTION
The EVAL-10MSOPEBZ evaluation board evaluates 10-lead
MSOP devices in the Switches and Multiplexers Portfolio that
are purchased separately. A clamp is supplied with the EVAL-
10MSOPEBZ to secure a 10-lead MSOP device to the evaluation
board without the need for soldering, making the EVAL-
10MSOPEBZ evaluation board reusable for multiple devices.
Figure 1 shows the EVAL-10MSOPEBZ evaluation board. A
10-lead MSOP device can be clamped or soldered to the center
of the EVAL-10MSOPEBZ evaluation board. Each pin of the
device has a corresponding link from K1 to K10 that can be set
to either VDD or GND. A wire screw terminal supplies VDD
and GND. SMB connectors on the board allow additional external
signals to be supplied to the device. In addition, there is space
available at the top of the EVAL-10MSOPEBZ evaluation board
for prototyping.
Full specifications of the device under test (DUT) are available
in the corresponding product data sheet, which should be
consulted in conjunction with this user guide when using the
evaluation board.
EVAL-10MSOPEBZ EVALUATION BOARD PHOTOGRAPH
Figure 1.
14928-001
Verzeichnis
- ・ Teilenummerierungssystem on Seite 6
- ・ Blockdiagramm on Seite 4
