herunterladen
Quad, 16-/14-/12-Bit nanoDAC+
with 2 ppm/°C Reference, SPI Interface
Data Sheet
AD5686R/AD5685R/AD5684R
FEATURES
High relative accuracy (INL): ±2 LSB maximum at 16 bits
Low drift 2.5 V reference: 2 ppm/°C typical
Tiny package: 3 mm × 3 mm, 16-lead LFCSP
Total unadjusted error (TUE): ±0.1% of FSR maximum
Offset error: ±1.5 mV maximum
Gain error: ±0.1% of FSR maximum
High drive capability: 20 mA, 0.5 V from supply rails
User selectable gain of 1 or 2 (GAIN pin)
Reset to zero scale or midscale (RSTSEL pin)
1.8 V logic compatibility
50 MHz SPI with readback or daisy chain
Low glitch: 0.5 nV-sec
Robust 4 kV HBM and 1.5 kV FICDM ESD rating
Low power: 3.3 mW at 3 V
2.7 V to 5.5 V power supply
−40°C to +105°C temperature range
APPLICATIONS
Optical transceivers
Base-station power amplifiers
Process control (PLC I/O cards)
Industrial automation
Data acquisition systems
FUNCTIONAL BLOCK DIAGRAM
Figure 1.
GENERAL DESCRIPTION
The AD5686R/AD5685R/AD5684R, members of the
nanoDAC+® family, are low power, quad, 16-/14-/12-bit
buffered voltage output DACs. The devices include a 2.5 V,
2 ppm/°C internal reference (enabled by default) and a gain
select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V
(gain = 2). All devices operate from a single 2.7 V to 5.5 V
supply, are guaranteed monotonic by design, and exhibit less
than 0.1% FSR gain error and 1.5 mV offset error performance.
The devices are available in a 3 mm × 3 mm LFCSP and a
TSSOP package.
The AD5686R/AD5685R/AD5684R also incorporate a power-
on reset circuit and a RSTSEL pin that ensures that the DAC
outputs power up to zero scale or midscale and remains there
until a valid write takes place. Each part contains a per-channel
power-down feature that reduces the current consumption of
the device to 4 µA at 3 V while in power-down mode.
The AD5686R/AD5685R/AD5684R employ a versatile SPI
interface that operates at clock rates up to 50 MHz, and all
devices contain a V
LOGIC
pin intended for 1.8 V/3 V/5 V logic.
Table 1. Quad nanoDAC+ Devices
Interface Reference 16-Bit 14-Bit 12-Bit
SPI Internal AD5686R AD5685R AD5684R
External AD5686 AD5684
I
2
C
Internal
AD5696R
AD5695R
AD5694R
External AD5696 AD5694
PRODUCT HIGHLIGHTS
1. High Relative Accuracy (INL).
AD5686R (16-bit): ±2 LSB maximum
AD5685R (14-bit): ±1 LSB maximum
AD5684R (12-bit): ±1 LSB maximum
2. Low Drift 2.5 V On-Chip Reference.
2 ppm/°C typical temperature coefficient
5 ppm/°C maximum temperature coefficient
3. Two Package Options.
3 mm × 3 mm, 16-lead LFCSP
16-lead TSSOP
SCLK
V
LOGIC
SYNC
SDIN
SDO
INPUT
REGISTER
DAC
REGISTER
STRING
DAC A
BUFFER
V
OUT
A
INPUT
REGISTER
DAC
REGISTER
STRING
DAC B
BUFFER
V
OUT
B
INPUT
REGISTER
DAC
REGISTER
STRING
DAC C
BUFFER
V
OUT
C
INPUT
REGISTER
DAC
REGISTER
STRING
DAC D
BUFFER
V
OUT
D
V
REF
GND
V
DD
2.5V
REFERENCE
POWER-
DOWN
LOGIC
POWER-ON
RESET
GAIN
×1/×2
INTERFACE LOGIC
RSTSEL GAINLDAC RESET
AD5686R/AD5685R/AD5684R
10485-001
Rev. C Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2012–2014 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
Verzeichnis
- ・ Konfiguration des Pinbelegungsdiagramms on Seite 10 Seite 30
- ・ Abmessungen des Paketumrisses on Seite 30
- ・ Teilenummerierungssystem on Seite 31
- ・ Blockdiagramm on Seite 1 Seite 20
- ・ Schweißen Temperatur on Seite 9
- ・ Beschreibung der Funktionen on Seite 1 Seite 10 Seite 30
- ・ Technische Daten on Seite 1 Seite 3 Seite 7 Seite 9
- ・ Anwendungsbereich on Seite 1 Seite 28
- ・ Elektrische Spezifikation on Seite 11
