herunterladen
Tiny 16-/14-/12-Bit SPI nano
DAC+, with
±2 (16-Bit) LSB INL and 2 ppm/°C Reference
Data Sheet
AD5683R/AD5682R/AD5681R/AD5683
Rev. D Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2013–2016 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
Ultrasmall package: 2 mm × 2 mm, 8-lead LFCSP
High relative accuracy (INL): ±2 LSB maximum at 16 bits
AD5683R/AD5682R/AD5681R
Low drift, 2.5 V reference: 2 ppm/°C typical
Selectable span output: 2.5 V or 5 V
AD5683
External reference only
Selectable span output: V
REF
or 2 × V
REF
Total unadjusted error (TUE): 0.06% of FSR maximum
Offset error: ±1.5 mV maximum
Gain error: ±0.05% of FSR maximum
Low glitch: 0.1 nV-sec
High drive capability: 20 mA
Low power: 1.2 mW at 3.3 V
Independent logic supply: 1.62 V logic compatible
Wide operating temperature range: −40°C to +105°C
Robust 4 kV HBM ESD protection
APPLICATIONS
Process controls
Data acquisition systems
Digital gain and offset adjustment
Programmable voltage sources
FUNCTIONAL BLOCK DIAGRAM
AD5683R/
AD5682R/
AD5681R
V
REF
GND
LDAC
REF
V
DD
V
LOGIC
*
POWER-DOWN
CONTROL LOGIC
DAC
REGISTER
POWER-ON
RESET
2.5V
REF
OUTPUT
BUFFER
16-/14-/12-BIT
DAC
INPUT
CONTROL LOGIC
V
OUT
SCLK SDISYNC
RESET
*NOT AVAILABLE IN ALL THE MODELS
SDO*
RESISTOR
NETWORK
11955-001
Figure 1. AD5683R/AD5682R/AD5681R MSOP
(For more information, see the Functional Block Diagrams—LFCSP section.)
GENERAL DESCRIPTION
The AD5683R/AD5682R/AD5681R/AD5683, members of the
nanoDAC+® family, are low power, single-channel, 16-/14-/12-bit
buffered voltage out digital-to-analog converters (DACs). The
devices, except the AD5683, include an enabled by default internal
2.5 V reference, offering 2 ppm/°C drift. The output span can be
programmed to be 0 V to V
REF
or 0 V to 2 × V
REF
. All devices
operate from a single 2.7 V to 5.5 V supply and are guaranteed
monotonic by design. The devices are available in a 2.00 mm ×
2.00 mm, 8-lead LFCSP or a 10-lead MSOP.
The internal power-on reset circuit ensures that the DAC register
is written to zero scale at power-up while the internal output
buffer is configured in normal mode. The AD5683R/AD5682R
/AD5681R/AD5683 contain a power-down mode that reduces
the current consumption of the device to 2 µA (maximum) at 5 V
and provides software selectable output loads while in power-
down mode.
The AD5683R/AD5682R/AD5681R/AD5683 use a versatile
3-wire serial interface that operates at clock rates of up to 50 MHz.
Some devices also include asynchronous
RESET
pin and V
LOGIC
pin options, allowing 1.8 V compatibility.
Table 1. Single-Channel nanoDAC+ Portfolio
Interface Reference 16-Bit 14-Bit 12-Bit
SPI Internal AD5683R AD5682R AD5681R
External AD5683
I
2
C Internal AD5693R AD5692R AD5691R
External AD5693
PRODUCT HIGHLIGHTS
1. High Relative Accuracy (INL).
AD5683R/AD5683 (16-bit): ±2 LSB maximum.
2. Low Drift, 2.5 V On-Chip Reference.
2 ppm/°C typical temperature coefficient.
5 ppm/°C maximum temperature coefficient.
3. Two Package Options.
2.00 mm × 2.00 mm, 8-lead LFCSP.
10-lead MSOP.
Verzeichnis
- ・ Konfiguration des Pinbelegungsdiagramms on Seite 9 Seite 10 Seite 27
- ・ Abmessungen des Paketumrisses on Seite 27
- ・ Teilenummerierungssystem on Seite 28
- ・ Blockdiagramm on Seite 1 Seite 3 Seite 19
- ・ Typisches Anwendungsschaltbild on Seite 7
- ・ Beschreibung der Funktionen on Seite 1 Seite 9 Seite 10 Seite 27
- ・ Technische Daten on Seite 1 Seite 4 Seite 7 Seite 8
- ・ Anwendungsbereich on Seite 1
- ・ Elektrische Spezifikation on Seite 11
